How it works

1- Cleanse the chest area with an oil free cleanser like micellar water where you will be applying the breast lift tape. This will remove any traces of product & prep the skins surface to allow the tape adhesive to fully adhere. Thoroughly dry before you move on to the next step. If the skin is not 100% clean, dry and free from products including fake tan, makeup, powders and lotions the tape may not stick.

2- Hold the tape by the bottom, pointy side up, with the logo branding facing you, then peel off the removable layer.

3- Begin to apply your breast lift tape from the bottom up, beginning just below your breast. Always use your other hand to keep your breast supported to reduce strain on the tape! Do not press down on the breast too much as this can cause a flattened effect. See wide breast tip below to avoid spillage.

4- Keeping your breast held where you want it to remain, pull the tape up and over the rest of your breast with your spare hand. Rub the tape to bond the adhesive to the skin, ensuring the whole lift/tape is becoming attached. Our adhesive is heat activated, if you have issues with the adhesive sticking hold your hand over the tape to add heat for 1 minute.

Application tip: If you want your breast to be pushed more inwards for a central cleavage, Position the breast inward more whilst applying. Apply the tape more to the outside of your breast, forcing them inwards.

Wide/Low volume application tip:

If your breast is on the wide side or lost volume try squeezing in the breast so it becomes more compact instead of pressing the breast down and flattening it which can cause the breast to spill out of the tape. Use our Cleavage sculpting strips for additional support and shape.

DO NOT RE ADJUST: If you re adjust the tape it may not stick the second time so please avoid peeling off and re sticking, Apply in the mirror to judge the positioning accordingly.